10mm 120leds DC24V 10 Pixels WS2818/FW1935 Addressable White LED Strip

Professional Pixel LED Strip Lights Manufacturer & Supplier

Product Parameter

Item: STE-4PIN-W-120-24V

Voltage: DC24V

Power: 14.4 W/M

Pixel Quantity: 10 pixels/m

LED Quantity: 120 LEDs/m

Cutting Unit: 100 mm

Break Continue: Yes

PCB Width: 10 mm

We offer WS2818 LED strips with 60, 70, and 120 LEDs/m. White, CCT, and RGB colors are available for customization. For more information, please click:

WS2818 IC Chip Datasheet PDF Download

FW1935 IC Chip Datasheet PDF Download

10mm 120leds DC24V 10 Pixels WS2818/FW1935

Product Description

Breakpoint Resume LED Strip Guide

Product Description

Breakpoint Resume LED Strip Guide

WS2818 Vs WS2811 Vs UCS1903

Advantages of the WS2818 in Large-Scale Lighting Engineering:

In large-scale lighting projects, lighting stability is paramount. The WS2818 uses dual signals for data transmission, with breakpoint resumability. If one LED stops working, the next LED will function normally, unless two adjacent LEDs stop working in a row.

The WS2811 and UCS1903, on the other hand, use single-data-signal addressable LED strips. If one LED stops working, the entire strip stops working. This is not suitable for large-scale lighting projects.

Suntechlite LED VS Other Manufacturers

Why Choose Suntechlite Double Signal WS2818 LED Strip?

Comparison Items	Suntechlite	Other Manufacturers	Variance Analysis
PCB • Copper foil thickness • Plate making process • Circuit safety • SMT process	35+70 oz copper	25+25 oz or 18+18 oz copper	The thicker the copper foil, the higher the power capacity and the better the heat dissipation of the light board.
	Double-sided lamination	Front film coating, back oil coating	Lamination helps prevent physical damage, isolates from environmental aggression, improves flexibility, and resists high temperatures.
	Signal with protection resistor and filter capacitor	No protection resistor / no filter capacitor	Protection resistors and filter capacitors limit inrush current and suppress noise, improving anti-interference and preventing screen flicker.
	The solder joints are full and shiny	Low solder-tin joints	Full, well-wetted solder joints enhance the tensile strength of LED components and long-term reliability.
Wire • Core diameter • Outer skin diameter	0.15 mm × 26 pcs	0.15 mm × 17 pcs	Greater total conductor area provides higher current-carrying capacity and lower voltage drop.
Wire • Core diameter • Outer skin diameter	1.8 mm / 20 AWG	1.7 mm / 20 AWG	Thicker outer diameter indicates more robust insulation and better load capacity.
Adhesive backing	Genuine 3M 300LSE adhesive backing	Economical adhesive	3M adhesive offers strong bond, temperature resistance, waterproofing, and good resilience for long-term mounting.