Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| ST-WS2811-3PIN-WWA-30-12 | DC12V | 7.2 W/m | 10 Pixels | 30 | 100 mm | No | 10mm |
WWA Addressable 12V LED Strip Lighting
This one is cost cost-effective CCT addressable LED strip with fewer pixels and fewer LEDs per meter. If the budget is limited, this is a good option.
This WS2811 LED strip is with 3 in 1 white LED chips, make it CCT addressable, 30leds/m and 150leds each 5 meters per roll. This is a cost effective option compared to a 60-LED WWA WS2811 addressable LED strip. These 12V WS2811 LED strip lights are 3 lights cut at 10cm intervals, the cut length is more accurate, and you can easily get the strip length you want to install.
This WS2811 addressable LED strip can display a variety of dynamic white light effects through the WS2811 controller (SPI controller). It comes with a 3pin JST connector and a 2-pin power wire to connect, easy to use.
The newly launched addressable WWA WS2811 LED light strip features adjustable color temperatures between 2700K and 6500K. It can create flowing water effects, warm white light, and daylight white chasing effects.
This dynamic WWA three-in-one LED light strip integrates 30 LED chips per meter. Each external WS2811 IC chip controls three LED chips, creating a more subtle white light gradient effect. This programmable WWA light strip features GST connectors on both ends for quick connection to a programmable controller. 3M adhesive backing makes installation even easier.
This WWA LED light strip is 10mm wide, and 6mm, 8mm, and 12mm versions are also available. Each 100mm strip can be cut with scissors. Instructions are provided on the circuit board to ensure the strip is not damaged during cutting. This flexible light strip can be curled into various shapes to create unique artistic designs. You can also install it inside an aluminum channel or neon tube to disperse the light and create a spotless, dynamic chasing effect.
To fully utilize the addressable WWA LED strip, you can purchase both a WS2811 controller and a 12V power supply. A 3-pin LED connector is provided.
This 12V LED strip experiences no voltage drop when powered from one end for 10 meters, so you can confidently use it for your personal or commercial projects.
WWA 30 LEDs/m WS2811 Digital LED Strip Advantages:
1. Addressable WWA LED strip, 5 meters/16.4 feet per roll.
2. DC12V input voltage, 3M adhesive backing.
3. One WS2811 IC controls three 3-in-1 5050 SMD LEDs.
4. 10mm width, can be freely cut into 100mm sections.
5. Provide different waterproof levels: IP20 non-waterproof, IP65 splashproof, IP67 outdoor waterproof, IP68 underwater.
- Difference: WS2811 VS WS2812
- WS2812 LED Strip vs WS2811 LED Strip Performance Comparison
- Things to Consider When Purchasing WS2811 or WS2812 LED Light Strips
Why Choose UCS1903? UCS1903 vs WS2811
- Table Compare: UCS1903 vs WS2811 LED Strip
- UCS1903 vs WS2811 LED Strip Signal Transmission Compare
- UCS1903 and WS2811 LED Strip Remove Capacitor Video Comparison
- WS2811 VS WS2818B , What’s the difference?
- Deep Dive into WS2811 vs WS2818B LED Strips
- Choosing Between WS2811 and WS2818B
How to Drive WS2811 LED Strips with ESP8266 & FastLED?
- WS2811 Connect ESP8266 Materials Required
- ESP8266 Control Board
- WS2811 LED Strip Connection Diagram With ESP8266
- Code Upload of WS2811 Controlled with ESP8266
- Demonstration Video Display Lighting Effect
How to Control WS2811 Addressable LED Strips with Arduino?
- Materials Required WS2811 Controlled by Arduino
- ESP8266 Control Board
- Connection Diagram Arduino Control WS2811 LED
- Arduino Control WS2811 Program Code
- WS2811 Demonstration Video Lighting Effect
How to Wire WS2811 WWA LED Strip?
Related Products You May Need:
Accessories
Connection Cable
Controllers
