Wireless Single-Zone Touch Panel Controller

Wireless Single-Zone Touch Panel Controller is a simple wireless device for controlling one lighting zone. The touch panel allows users to turn lights on and off, adjust their brightness and change their colors. It uses RF wireless technology, so no wiring of the panel and the LED controller is needed.

This type of controller is widely used in residential lighting, hotels, and small commercial lighting projects where simple and reliable single-zone control is required.

Buy more: Touch Panel Controller

Learn more different type of LED controllers:

SP105E vs SP107E vs SP108E vs SP110E LED Strip Controllers

Individually Addressable LED Strip Guide RGB RGBW and Controllers

R4-CC R Series Constant Current Receiver>>

Model: R4-CC-433M/R4-CC-2.4G
Working Voltage: DC12V-DC48V
Output Current: 350/700mA×4CH
Driving LEDs/ CH: 1~12pcs 1W(3W) LED

Working Temp: -30℃-55℃
Dimensions: L176×W46×H30(mm)
Weight: 137g

The receiver can compatible with our 5 different function remote control or 2.4G wireless controller to realize function such as dimming, RGB/RGBW and color temperature control. Automatically adapt to LED light, which works from DC12V to 48V.

R4 R Series Constant Voltage Receiver>>

Model: R4-433M/R4-2.4G
Working Voltage: DC12V-DC24V
Output Current: Max5A×4CH
Output Power: Max 240W(12V)/480W(24V)

Working Temp: -30℃-55℃
Dimensions: L176×W46×H30(mm)
Weight: 115g

10 strobe & fade change modes, with 4096 grey scales per channel; LED lamp is richer and more vivid without flash. The receiver is compatible with our 5-function remote control and 2.4G wireless controller. It supports dimming, RGB/RGBW control, and color temperature adjustment.

P1X P2X P3X P4X PX Series Touch Panel Dim RGB RGBW CCT Controller>>

Model: P1X: Dim Panel
Input Voltage: AC85V-265V
Output Signal: DMX512+2.4G WIRELESS
DMX512 Socket: Wiring Terminal

Dimming Range: 5%-100%
Working Temperature: -20°C~55°C
Dimension: L86×W86×H36(mm)
Weight(G.W): 230g

The controller can memorize up to 8 IDs. When receiving control information from any learnt ID, it can be controlled. If the memorized ID is up to 8, long-press the learning key for 3 seconds to exit learning mode, cancel the ID, and reset.