CCT 60leds Pixel LED Strip WS2818
Professional Addressable LED Strip Light Manufacturer
Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| ST-WS2818-4PIN-CCT-60-12 | DC12V | 14.4 W/m | 20 Pixels | 60 | 50 mm | Yes | 10 mm |
WS2818 CCT 60leds Pixel LED Strip Light
Addressable CCT LED strip with IC WS2818, which has a backup function; if one IC is damaged, the signal can still pass through. Each LED has 3 colors, namely 3 in 1 white LED chip combines warm white 2700k, natural white 4000k and cool white 6500k.
This WS2818 LED strip can display a variety of dynamic modes of white light color temperatures (flowing water, color chasing, etc.).
Adapting the WS2818 IC chip upgraded version of WS2811, this 10mm wide WWA LED strip is breakpoint resume, if one LED loses work, others still work. Comes with 4pin JST signal connector and 2pin power wire at each end, allowing quick connection. This 16.4ft white light addressable LED strip is powered by 12V DC and consumes 14.4W per meter. It requires a 12V SPI controller and a 12V power adapter or a 12V switching power supply (minimum 66W capacity) to drive.
What is a WS2818 addressable CCT LED strip?
This WS2818 addressable CCT LED strip integrates three-in-one warm white, daylight white, and cool white LEDs. WS2818 is controlled by an external IC. It features three channels (OUTR/OUTG/OUTB) with resumable data transmission.
This addressable CCT LED offers adjustable color temperature from 2700-6500K. A 12V DC supply allows for a circuit of three LEDs, while a 24V DC supply allows for a circuit of six LEDs. When used with a Pixel LED controller or Arduino development board, any circuit of LEDs can be controlled to create various lighting effects.
1. This addressable CCT WS2818 LED strip allows you to adjust the brightness and color temperature of the LED strip via RF or a smartphone app. It is suitable for indoor home lighting.
2. LED density: 60 LEDs/m; external IC, using SMD5050 high-brightness LEDs.
3. Supports DC12/24V low-voltage input. DC12V LED strips can be cut every 3 LEDs, with no voltage drop over 5-7 meters; DC24V LED strips can be cut every 6 LEDs, with no voltage drop over 8-10 meters.
4. Programmable LED strips with breakpoint-resume transmission. A single pixel failure will not affect signal transmission unless two adjacent pixels fail simultaneously.
CCT WS2818 Product Features
- Addressable white 3-in-1 LED strip
- 2700-6500K color temperature adjustment range
- Using a high-voltage CMOS process
- 12/24V output voltage tolerance
- Built-in 5V VDD regulator
- Single-wire dual-channel serial cascade interface
- Built-in RC oscillator
- Built-in power-on reset circuit
- Data transmission rate up to 800kHz
- WS2818 IC dual-channel breakpoint resume transmission
- 60 LEDs/m high brightness
- IP20/65/67/68 waterproof rating options
- Single IC controls 3/6 LEDs; 3/6 LEDs can be cut
- 3M adhesive tape for easy installation
WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Chips
- WS2815 vs. WS2812 vs. WS2818 LED Strip
- Applications: WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Strip Installation Tips
- Pros and Cons Summary WS2815 vs. WS2812 vs. WS2818
- Choosing the Right LED Strip for Your Needs
- WS2811 VS WS2818B, What’s the difference?
- Deep Dive into WS2811 vs WS2818B LED Strips
- Choosing Between WS2811 and WS2818B
WS2818B vs FW1935/TM1934 vs FW1834
- WS2818B vs FW1935/TM1934 vs FW1834, What’s the difference?
- Deep Dive into WS2818B vs FW1935/TM1934 vs FW1834 LED Strips
- Choosing Between WS2818B vs FW1935/TM1934 vs FW1834
WS2818B VS UCS5603A VS UCS5603B LED Strips
- WS2818B vs UCS5603A vs UCS5603B, What’s the difference?
- Deep Dive into WS2818B vs UCS5603A vs UCS5603B LED Strips
- Choosing Between WS2818B vs UCS5603A vs UCS5603B
How to Control WS2818 LED Strips with ESP32?
- Materials Required
- ESP32 and WS2818 Wiring Schematic
- ESP32 and WS2818 Connection Diagram
- WS2818 Program Code Upload
- WS2818 Lighting Effect Demonstration Video
How to Control WS2818 LED Strips with Raspberry Pi
- Materials Required
- WS2818 and Raspberry Pi Wiring Schematic
- Raspberry Pi Connect WS2818 Diagram
- Code Upload
- Raspberry Pi Control WS2818 Lighting Effect Demonstration
DC12V 60LEDs/m WS2818 Addressable LED Strip Schematic Diagram
We offer WS2818 LED strips with 60, 70, and 120 LEDs/m. White, CCT, and RGB colors are available for customization. For more information, please click:
WS2818 IC Chip Datasheet PDF Download 
WS2818 Addressable CCT LED Strip Specification PDF Download
WS2818 PIN Function Description
OUTR (LED Driver Output): Output of Red PWM control
OUTG (LED Driver Output): Output of Green PWM control
OUTB (LED Driver Output): Output of Blue PWM control
DO (Data Output): Data cascade output
DIN (Data Input): Control data input
GND (Ground): Data & Power Grounding
BIN (Backup Data Input): Backup control data input
VDD (Power Voltage): IC power supply
Note:
- OUTR/OUTG/OUTB independently control the PWM signals for the red, green, and blue LEDs, respectively, making them suitable for full-color LED dimming.
- DIN receives data from the master control, and DO outputs processed data to the next-level chip, supporting multi-chip cascade control.
- BIN serves as a backup data input channel to enhance system reliability (it is enabled in the event of a primary data path failure).
- VDD provides chip power, and GND is the shared ground for both data and power.
Related Products You May Need:
Accessories
Connection Cable
Controllers
