> DMX LED Strip - Leading China Pixel LED Manufacturer
Search
Close this search box.

DMX LED Strip Manufacturer

Types of DMX Addressable LED Strip Lights

RGB DMX 12V LED Strip>>

Item: ST-DMX-5PIN-RGB-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50mm

Power: 14.4 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

5meters 60LEDs/m DMX512 RGB led strip lights for sale, with 12V+ GND A B P 5CH wires. The 12V DMX led strip supports the operation mode of the first installation and then writing code, and any animation effects can be realized through the artnet dmx controller programming. 

Item: ST-DMX-5PIN-RGB-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

1. Low voltage DC24V which can make sure longer running distance to 10 meters same rightness, also energy-saving and environmentally friendly.
2. Adopts high-quality material, make high bright 5050 RGB LED chips, based on flexible FPC substrate, with the advantage of good conductivity, faster heat dissipation, bending resistance, easy to get the shape you need. 

Item: ST-DMX-5PIN-RGB-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 33.3mm

Power: 14.4 W/m 
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC12v 60leds per meter 30 pixels per meter, it is a unique design compared to DMX 12v 60leds per meter and 20 pixels per meter LED strip in the market.
A dual data signal 5 pin dmx controlled RGB rope light with 60 LEDs per meter, DC 12 volts power input. Each 2-LED segment of this dmx RGB led tape is controlled by a 10-pin UCS512 DMX512 IC

Item: ST-DMX-5PIN-RGB-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 33.3mm

Power: 14.4 W/m 
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC24v 60leds per meter 30 pixels per meter, it is a unique design compared to DMX 24v 60leds per meter and 10 pixels per meter LED strip in the market.
This High Bright DMX RGB LED Strip for your building lighting decorations, with a special 24v LED strip but with each 2 leds cuttable instead of 6 leds cuttable. LEDs design, high brightness.

Item: ST-DMX-5PIN-RGB-72-24
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

Please pay attention this strip is 8mm width and 72leds per meter, it is a unique design compared to DMX 24v 60leds per meter and 10 mm width LED strip in the market.
5 meters DC24V 72LEDs/m dmx controlled led tape light for sale, 8mm PCB wide, each 6 RGB lights can be cut at each 83mm. 1 pixel =6 LEDs, 60 pixels a roll 5 meters.

Item: ST-DMX-5PIN-RGB-120-24
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100mm

Power: 28 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC24v 10mm width and 120leds per meter, it is a unique design compared to DMX 24v 10 mm width and 60leds per meter LED strip in the market.
A higher density 120LEDs/m 2835 RGB DMX 512 led strip. It adapts 3in1 5050 RGB multi-color LED as light source, having more color possibilities.

Item: ST-DMX-5PIN-RGBW-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 19.2 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this RGBW DMX strip is DC24v 10mm width and 60leds per meter, it is a unique design compared to DMX 24v 12 mm width and 60leds per meter LED strip in the market.
DMX LED strip lights are with low power consumption, it only consumes 19.2W per meter, and 96W per roll.

Item: ST-DMX-5PIN-W-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50mm

Power: 14.4 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters DMX controlled led strip for sale. The DMX512 IC can support this each IC 3 channels . You can use dmx controller, Artnet controller, Madrix console, or GPS signal to control the dmx lighting. 
It adapts 3in1 5050 white color LED as light source, high brightness and low power consumption.

Item: ST-DMX-5PIN-W-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters DMX controlled led strip for sale. The DMX512 IC can support this each IC 3 channels . You can use dmx controller, Artnet controller, Madrix console, or GPS signal to control the dmx lighting. 
It adapts 3in1 5050 white color LED as light source, high brightness and low power consumption.

Item: ST-DMX-5PIN-W-72-24
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

5 meters 72LEDs/m addressable white DMX light strip for sale. You can edit programs via the artnet dmx controller to design the lighting effects as you like. 
This white color which is available in 3000k, 4000k, 5000k and 6000k can is addressable dmx led rope light adapts bright 5050SMD LEDs and external DMX512 ICs, more stable.

Item: ST-DMX-5PIN-WWA-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters per roll LED color temperature addressable 3-in-1 CCT DMX 512 tunable white led light strip for sale. There are 60 CCT lights per meter (10 ICs in one meter), 6 LED lights can be cut, 100mm cut length. 1 pixel = 6 lights, 50 pixels per roll. 

Item: ST-DMX-5PIN-CCT-60-12
LED Qty: 60 
Voltage: DC12V
Cutting Unit: 50 mm

Power: 19.2 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

DMX control CCT/WWA white addressable led lights, this dmx tunable white led strip adapts 3in1 CCT SMD LEDs, the LED color temperature can be adjusted from 2700K warm white, 4000k natural white to 6500K daylight. And various color temperatures dynamic modes can be displayed on the strip light. 

Item: ST-DMX-CCT-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

This is the DMX 512 CCT digital led strip light that different from normal SPI pixel led strip lights. Its signal protocol is parallel not series, which can avoid the failure of one light in serial connection resulting in non-operation.

Item: ST-DMX-CCT-72-24V
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

DMX control CCT/WWA white addressable led lights, this dmx tunable white led strip adapts 3in1 CCT SMD LEDs, the LED color temperature can be adjusted from 2700K warm white, 4000k natural white to 6500K daylight. And various color temperatures dynamic modes can be displayed on the strip light. 

Item: ST-DMX-5PIN-UV-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Wavelength: 365nm/395nm
Pixel Qty: 10 Pixels
Power: 14.4 W/m 
Break Continue: Yes

SMD5050 UV LEDs are used, which is different from ordinary SMD5050 RGB or RGBW, different wavelength black light wavelength 365nm and 395nm are both for options which can generate mysterious atmosphere for night club lighting.

Write Address for DMX LED Light

Auto Addressing DMX LED Light

What is DMX LED Strip Light

DMX LED strip light is a type of addressable LED strip lights that can be controlled using DMX (Digital Multiplex) signals. DMX is a digital communication protocol that is commonly used in stage lighting and other professional lighting applications.

It typically has an integrated DMX decoder, which allows them to receive DMX signals and convert them into lighting effects. This allows for precise control over the color, brightness, and other parameters of the LED strip.

DMX LED tape light often used in professional lighting applications, such as stage and event lighting, as they offer advanced control capabilities and can be easily integrated into DMX lighting systems. They are also popular in stage lighting and other commercial installations, where precise control and customization are important.

How to Wire and Control DMX LED Strip

First, prepare a power supply, a controller, and a roll of DMX LED strips.

Second, connect the power wire and LED strip connector to the controller.

Third, connect the controller to the power supply.

Fourth, connect the DMX strip input terminal to the controller. 

For DMX LED strips, we need to set addresses before controlling. The above video has shown the address setting process. About how to connect and control the DMX LED strip light, please click connect and control addressable LED strip, which includes the song guide of WS2811, WS2815 SPI LED strips and DMX LED strip.

DMX LED Strip Specification Download

File Name Download
UCS512 60leds 72leds Addressable RGB LED Strip Specification Download Icon
UCS512 60leds 72leds Addressable White LED Strip Specification Download Icon
UCS512 60leds 72leds Addressable CCT LED Strip Specification Download Icon
UCS512 60LEDs Addressable RGBW LED Strip Specification Download Icon
UCS512 120leds Addressable RGB LED Strip Specification Download Icon

Product Features

Advanced control capabilities: Can be controlled using DMX signals which is a standard international protocol which match various controllers that support DMX signale. DMX has strong anti-interference ability which could be used for large and important project.

Wide range of color options: We can produce a wide range of colors, including RGB, RGBW, and addressable white, making them ideal for creating dynamic and customizable lighting effects.

High-quality and reliable : DMX chip we use brand UCS or TM , both are quite reliable and stable 

Easy integration: Can be easily integrated into DMX lighting systems, allowing for seamless control and synchronization with other lighting fixtures.

Easy to control: Can be easily controlled using a variety of devices, including DMX controllers, computer software, and mobile apps, providing convenient and flexible control options.

DMX vs. SPI LED Strip

DMX LED strip vs SPI LED strip

DMX LED strips are typically more complex and expensive than SPI LED strips, but offer a wider range of professional-grade features and capabilities, making them suitable for use in stage lighting, architectural lighting, and other high-end applications. 

SPI LED strips are more affordable and easy to use than DMX LED strips, making them a popular choice for DIY and hobbyist projects, as well as smaller-scale lighting installations.

For more differences between DMX and SPI, please check this article: DMX vs SPI Strip Light

DMX LED Lighting Applications

Concert lighting

Fashion show lighting

Theme party lighting

Wedding reception lighting

Museum exhibit lighting

Trade show booth lighting

Casino lighting

Dance club lighting

Holiday lighting displays

Addressable LED Strip controller application

DMX LED Tape Light Accessories

Cable Connectors

Why Choose SunTechLite

Located in Shenzhen, SunTechLite is one of the leading LED strip lights manufacturers in China. After 15 years of development, we have developed into a company integrating production and trade, and have won the trust and support of customers from all over the world with high-quality products and high-quality services.

Our Addressable LED light strips have the following main advantages:

  1. PCB thickness: SuntechLite uses 0.25mm and 0.35mm PCB for our regular strip lights. (The thickness of the general PCB on the market is 0.2mm.) The thicker the PCB board, the greater the current flowing, and the higher the efficiency of the light strip.
  2. High-quality Resistors: Authentic Guarantee, Antioxidant. DC12v LED strip generally uses 0.8mm*0.5mm resistors, DC24v LED strip generally uses 1.2mm*0.6mm resistors. This makes the strips have good heat dissipation, high temperature resistance, and very stable.
  3. Dual capacitor design: Dual capacitor design can protect the IC, and the signal transmission is stable.
  4. Firm light strip connection: Tin is added to the connection of the light strip, which is convenient for welding after cutting. The solder joints are full, and there will be no false welding.

Besides, we have a specialized engineering team to offer technical support and assistance with the installation and programming of the LED strips. And you can feel free to contact us if any questions in the using process.

To know more about our PCB design advantages, please click unique PCB design by SunliteThis article has described our PCB design with detailed products and pictures in detail. And we have made a PDF profile to describe the advantages of the LED strip light, please click Suntechlite LED Strip Advantages to view details.

FAQ about DMX LED strip

1. How do I connect DMX LED digital strips to a DMX controller?
DMX digital strips can be connected to a DMX controller using a DMX cable or wireless DMX transmitter. The wiring should be connected to the DMX decoder or controller according to the manufacturer’s instructions.

2. Can DMX LED digital strips be dimmed?
Yes, DMX LED digital strips can be dimmed using a DMX controller or software. This allows users to adjust the brightness of the LED strip to the desired level.

3. How do I control multiple DMX strip lights?
Multiple DMX strip lights can be controlled using a DMX controller or software that supports multiple DMX universes or channels. This allows users to synchronize the lighting effects of multiple fixtures.

4. How do I address DMX512 LED strips?
DMX512 LED strips are typically addressed using DIP switches or software. The address determines the DMX channel that the LED strip will respond to. You can click “How to Write Address for DMX LED Lights” to watch the video guide.

5. Can I cut DMX addressable LED strips to fit a specific length?
Yes, DMX addressable LED strips can usually be cut to fit a specific length. However, it is important to cut the strip at the cutting mark places.

 

Enquiry