Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| STE-TTL-3PIN-W-48-24 | DC24V | 12 W/m | 8 Pixels | 48 | 125 mm | No | 10 mm |
1800K SM16703 Amber LED Strip Lighting
The SM16703 comes with a 3-pin JST connector and a 2-pin power wire to connect, easy to use. With a 3M double-sided tape, you can stick the addressable LED strip to any flat or uneven surface.
This LED strip is easily customizable, supporting cutting at designated points to fit specific lengths required for different projects at each 125mm. It operates on a low voltage DC24v, enhancing safety for indoor environments. The amber color emitted by this strip is perfect for creating a cozy, inviting atmosphere, making it ideal for accent lighting in homes, restaurants, bars, and event spaces. It can also be used for architectural lighting to highlight features and add a warm tone to exteriors and interiors alike.
White SM16703 LED Strip Product Feature
- Input VoltageDC24V, single signal (data) control.
- External SM16703 IC control, each six LEDs is programmable.
- 48leds/m available, SMD5050, white color, 8 pixels per metre.
- 125mm intervals, cutting point.
- White light color temperature 1800K/2700K/3000K/4000K/5000K/6000K, customizable.
- White PCB/Black PCB available. IP20/IP65/IP67/IP68 available.
- Both ends wired with 20Awg wire and JST 3Pin male/female connector
- 3M adhesive tape sticks on the back of the non-waterproof version.
- Controller System: SD controller, DMX controller, Artnet.
SM16703 LED IC Datasheet PDF Download 
SM16703 Addressable White LED Strip Specification PDF Download
For more comparisons of SPI addressable LED strips, please click here.
How to Control SM16703 White LED Strip?
As a 3-pin single signal transmission addressable LED strip, SM16703 RGB LED Strip connected to the LED controller is similar to WS2811. Below is the wiring diagram of the pixel SM16703 white LED strip connected to the offline K-1000C LED controller.
Prepare the required equipment, mainly the SM16703 white LED strip, power supply, and controller. Prepared an adjustable voltage power supply, a K-1000C controller, and a roll of DC12V SM16703 LED strip.
Connect the controller to the power supply. Note that the red wire is V+ and the black wire is GND.
For more wiring details, please read our blog: How to Control Connect and Wire Addressable LED Strip?
Please pay attention to the direction of data transmission before connection to avoid reverse signal connection. (If the data transmission of the SM16703 LED strip is reversed, it will cause damage to the ICs and LED beads.) The BLACK ARROWS on the LED strip tell the signal transmitting direction. If connected oppositely, the strip will not work.
Related Products You May Need:
Accessories
Connection Cable
