BC 800

BC-800 DMX512-RDM Controller

Product Code: BC-800

1. Working voltage from DC12V-DC24V.

2. TFT LCD display and directional keyboard input, visual operation, intuitive and simple

3. Support search RDM slave device, Change the starting address, control slave device channel output, etc.

4. Analyze the DMX signal waveform to determine whether the output DMX signal meets the standard protocol.

BC-800 DMX512-RDM Controller Overview

The BC-800 is a DMX512-RDM master controller with a TFT LCD and directional keyboard — it searches, addresses and drives RDM fixtures straight from the unit, no PC required.

It scans the line for RDM slave devices, sets their start addresses and channel output, then analyses the outgoing DMX waveform to confirm the signal meets the standard protocol. Working voltage is DC 12–24V.

Technical Specifications

Parameter Value
Product code BC-800
Type DMX512-RDM master controller
Working voltage DC 12V – 24V
Display TFT LCD
Input Directional keyboard
RDM functions Device search, start-address set, channel output control
DMX check Signal waveform / protocol analysis

BC-800 DMX512 RDM Controller PDF Download

RDM Controller, Decoder or Amplifier — Which Do You Need?

  • BC-800 (master controller) — you need to generate and manage DMX from a console with LCD and keyboard, and search, address and control RDM fixtures on site.
  • BC-844 DMX512-RDM decoder — you need to convert DMX into constant-voltage LED output (it drives the strip, it does not run a show).
  • BC-818-RDM / BC-812-RDM signal amplifier — you need to boost or repeat the DMX signal across long cable runs so fixtures at the far end still read it.

Browse DMX LED strips   |   Request a quote   |   Download center

Enquiry