Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| ST-WS2818-4PIN-W-72-12 | DC12V | 17.2 W/m | 24 Pixels | 72 | 41.6 mm | Yes | 8 mm |
White 72leds Addressable LED Strip 8mm
This white addressable LED strip is our newly launched LED strip with 8mm width and 72leds/m, compared to 60leds/m 10mm width traditional white pixel light. More density and can fit narrow aluminum profiles.
The White 72LEDs Addressable LED Strip, with an 8mm width and designed for DC12V input, stands out for its precise cutting interval of 42mm. Allow each set of 3 LEDs to act as a single pixel. This design enables intricate customization and detailed lighting effects for various applications. Equipped with high-brightness SMD5050 Epistar LEDs, and 50,000 hours, backed by a 5-year warranty. The inclusion of the WS2818 IC adds a reliable backup break-continue function. Uninterrupted lighting even if a segment fails.
White WS2818 LED Strip Product Features
- Addressable white LED strip
- 2700-6500K color temperature adjustment range
- Using a high-voltage CMOS process
- 12/24V output voltage tolerance
- Built-in 5V VDD regulator
- Single-wire dual-channel serial cascade interface
- Built-in RC oscillator
- Built-in power-on reset circuit
- Data transmission rate up to 800kHz
- WS2818 IC dual-channel breakpoint resume transmission
- 72 LEDs/m high brightness
- IP20/65/67/68 waterproof rating options
- Single IC controls 3/6 LEDs; 3/6 LEDs can be cut
- 3M adhesive tape for easy installation
WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Chips
- WS2815 vs. WS2812 vs. WS2818 LED Strip
- Applications: WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Strip Installation Tips
- Pros and Cons Summary WS2815 vs. WS2812 vs. WS2818
- Choosing the Right LED Strip for Your Needs
- WS2811 VS WS2818B, What’s the difference?
- Deep Dive into WS2811 vs WS2818B LED Strips
- Choosing Between WS2811 and WS2818B
WS2818B vs FW1935/TM1934 vs FW1834
- WS2818B vs FW1935/TM1934 vs FW1834, What’s the difference?
- Deep Dive into WS2818B vs FW1935/TM1934 vs FW1834 LED Strips
- Choosing Between WS2818B vs FW1935/TM1934 vs FW1834
WS2818B VS UCS5603A VS UCS5603B LED Strips
- WS2818B vs UCS5603A vs UCS5603B, What’s the difference?
- Deep Dive into WS2818B vs UCS5603A vs UCS5603B LED Strips
- Choosing Between WS2818B vs UCS5603A vs UCS5603B
How to Control WS2818 LED Strips with ESP32?
- Materials Required
- ESP32 and WS2818 Wiring Schematic
- ESP32 and WS2818 Connection Diagram
- WS2818 Program Code Upload
- WS2818 Lighting Effect Demonstration Video
How to Control WS2818 LED Strips with Raspberry Pi
- Materials Required
- WS2818 and Raspberry Pi Wiring Schematic
- Raspberry Pi Connect WS2818 Diagram
- Code Upload
- Raspberry Pi Control WS2818 Lighting Effect Demonstration
DC12V 72LEDs/m WS2818 Addressable LED Strip Schematic Diagram
How to Control, Connect and Wire WS2818 LED Strip?
WS2818 LED strip is a pixel LED strip with external ICs, which has a good performance in signal transmission. Due to its dual signal transmission, the WS2818 strip can still work normally if one LED on the strip is damaged or broken.
WS2818 LED strip also has 4 wires like WS2815, and the following figure shows the details.
This is a wiring diagram of the DC12V WS2818 LED strip when using the K-1000C offline controller. The WS2818 LED strip can also be controlled by microcontrollers such as ESP32, ESP8266, Raspberry Pi, Arduino, etc.
WS2818 vs. WS2811 LED Strip
- Break-continue function: The WS2818B has this feature. Allow the system to continue operating even if a single pixel fails (unless two consecutive pixels fail). The WS2811 does not have this feature, and a single pixel failure will cause all subsequent LEDs to turn off.
- Refresh rate: The WS2811 has a 4kHz refresh rate. WS2811 provides smoother color transitions and better imaging. The WS2818B has a lower refresh rate of 2kHz.
- Signal protocol: The WS2818B uses a two-wire serial TTL/SPI protocol, supporting dual-signal anti-interference transmission; the WS2811 uses a standard three-wire protocol.
For more details about the difference between WS2818 and WS2811 LED strips, please click here.
Related Products You May Need:
Accessories
Connection Cable
Controllers
