Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| ST-WS2818-4PIN-WWA-60-12 | DC12V | 14.4 W/m | 20 Pixels | 60 | 50 mm | Yes | 10 mm |
WWA 60leds LED Strip WS2818 Light
WWA 60leds LED Strip WS2818 is equipped with the advanced WS2818 chip for seamless control and a dynamic range of color temperatures. Achieve the perfect blend of warm and cool tones, making it an ideal choice for creating captivating and adjustable lighting atmospheres with controllers such as K1000C, K8000C. If you need more professional suggestions, please feel free to contact Suliteleds.
Features as below:
- 5050 3in1 color temperature lamp beads, high color rendering, high brightness, and low energy consumption.
- Using high-quality diodes, uniform luminous without dark areas.
- 3 lights can be cut, easy to get the length you want.
- Flexible FPCB board, stable and foldable, easy to design and model.
What is a WS2818 addressable WWA LED strip?
This WS2818 addressable WWA LED strip integrates three-in-one warm white, daylight white, and cool white LEDs. WS2818 is controlled by an external IC. It features three channels (OUTR/OUTG/OUTB) with resumable data transmission.
This addressable WWA LED offers adjustable color temperature from 2700-6500K. A 12V DC supply allows for a circuit of three LEDs, while a 24V DC supply allows for a circuit of six LEDs. When used with a Pixel LED controller or Arduino development board, any circuit of LEDs can be controlled to create various lighting effects.
1. This addressable WA WS2818 LED strip allows you to adjust the brightness and color temperature of the LED strip via RF or a smartphone app. It is suitable for indoor home lighting.
2. LED density: 60 LEDs/m; external IC, using SMD5050 high-brightness LEDs.
3. Supports DC12/24V low-voltage input. DC12V LED strips can be cut every 3 LEDs, with no voltage drop over 5-7 meters; DC24V LED strips can be cut every 6 LEDs, with no voltage drop over 8-10 meters.
4. Programmable LED strips with breakpoint-resume transmission. A single pixel failure will not affect signal transmission unless two adjacent pixels fail simultaneously.
WWA WS2818 Product Features
- Addressable white 3-in-1 LED strip
- 2700-6500K color temperature adjustment range
- Using a high-voltage CMOS process
- 12/24V output voltage tolerance
- Built-in 5V VDD regulator
- Single-wire dual-channel serial cascade interface
- Built-in RC oscillator
- Built-in power-on reset circuit
- Data transmission rate up to 800kHz
- WS2818 IC dual-channel breakpoint resume transmission
- 60 LEDs/m high brightness
- IP20/65/67/68 waterproof rating options
- Single IC controls 3/6 LEDs; 3/6 LEDs can be cut
- 3M adhesive tape for easy installation
WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Chips
- WS2815 vs. WS2812 vs. WS2818 LED Strip
- Applications: WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Strip Installation Tips
- Pros and Cons Summary WS2815 vs. WS2812 vs. WS2818
- Choosing the Right LED Strip for Your Needs
- WS2811 VS WS2818B, What’s the difference?
- Deep Dive into WS2811 vs WS2818B LED Strips
- Choosing Between WS2811 and WS2818B
WS2818B vs FW1935/TM1934 vs FW1834
- WS2818B vs FW1935/TM1934 vs FW1834, What’s the difference?
- Deep Dive into WS2818B vs FW1935/TM1934 vs FW1834 LED Strips
- Choosing Between WS2818B vs FW1935/TM1934 vs FW1834
WS2818B VS UCS5603A VS UCS5603B LED Strips
- WS2818B vs UCS5603A vs UCS5603B, What’s the difference?
- Deep Dive into WS2818B vs UCS5603A vs UCS5603B LED Strips
- Choosing Between WS2818B vs UCS5603A vs UCS5603B
How to Control WS2818 LED Strips with ESP32?
- Materials Required
- ESP32 and WS2818 Wiring Schematic
- ESP32 and WS2818 Connection Diagram
- WS2818 Program Code Upload
- WS2818 Lighting Effect Demonstration Video
How to Control WS2818 LED Strips with Raspberry Pi
- Materials Required
- WS2818 and Raspberry Pi Wiring Schematic
- Raspberry Pi Connect WS2818 Diagram
- Code Upload
- Raspberry Pi Control WS2818 Lighting Effect Demonstration
How to Control, Connect and Wire WS2818 LED Strip?
WS2818 LED strip is a pixel LED strip with external ICs, which has a good performance in signal transmission. Due to its dual signal transmission, the WS2818 strip can still work normally if one LED on the strip is damaged or broken.
WS2818 LED strip also has 4 wires like WS2815, and the following figure shows the details.
This is a wiring diagram of the DC12V WS2818 LED strip when using the K-1000C offline controller. The WS2818 LED strip can also be controlled by microcontrollers such as ESP32, ESP8266, Raspberry Pi, Arduino, etc.
Related Products You May Need:
Accessories
Connection Cable
Controllers
