WS2815 LED Strip
What is WS2815 LED Strip Light?
WS2815 LED strip light is a type of addressable LED strip that uses the DC12v WS2815 chip, which is an improved version of the popular WS2812B chip that is DC5v input . The WS2815 chip has an added backup data line that allows for continued operation even if the signal line is broken or disconnected. This makes the WS2815 strip lights more reliable and easier to use in large installations.
WS2815 LED strips are typically controlled using a microcontroller or other programmable device, which sends digital signals to the strip to control the color and brightness of each individual LED. They are commonly used for decorative lighting, stage lighting, and other applications where programmable and customizable lighting is desired.
How To Use WS2815 LED Strip
The left video shows how we connect the WS2815 RGB LED strip and control them. Here are the simple steps:
Step 1: Get all the connection equipment ready.
Step 2: Connect the power cable and JST connector to the controller port.
Step 3: Connect the K-1000C controller to the DC12V power source.
Step 4: Connect the WS2815 LED strip to K-1000C controller.
After finishing connection, power on the strip and adjust the lighting effects by K-1000C.
You can click on How to wire and control addressable LED strip to view more details.
Types of WS2815 Addressable LED Strip Light
Item: STB-TTL-4PIN-RGB-60-12V; STB-TTL-4PIN-RGB-144-12V
LED Qty: 60/144
Voltage: DC12V
Cutting Unit: 16.67/6.9 mm
Power: 8.6/20.6 W/m
Pixel Qty: 60/144 Pixels
Break Continue: Yes
PCB Width: 10/12mm
This is regular WS2815 LED strip in market that features 60leds/m at 10mm width PCB and 144leds/m at 12mm width PCB. It is DC12v compared to DC5v WS2812B strip light.
Item: STB-TTL-4PIN-RGB-60/120/144-12V
LED Qty: 60/120/144
Voltage: DC12V
Cutting Unit: 16.6/16/6.9 mm
Power: 8.6/17.3/ 20.6W/m
Pixel Qty: 60/120/144 Pixels
Break Continue: Yes
PCB Width: 5/10/12mm
We developed new WS2815 LED strip with SMD3535 RGB at width from 5mm 120leds/m , 10mm 120leds/m , high density and thinner PCB width for customization lighting requirements.
Item: STB-TTL-4PIN-RGB-144-12V
LED Qty: 144
Voltage: DC12V
Cutting Unit: 6.9 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 12mm
This is regular SMD5050 144leds/m high density WS2815 RGB LED strip , but with black PCB which stage lighting requres. Each LED individually addressable.
Item: ST-WS2815-4PIN-RGB-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
If you need high density but with much thinner PCB , then this 5mm width WS2815 LED strip is perfect , DC12v input and dual signal design to make it more stable function, if one LED damages, the signal can still pass through.
Item: ST-WS2815-4PIN-W-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10 mm
We lauched new white addressable LED strip WS2815 , each LED individually addressable with 120leds/m, high density to make even and continuous illumination.
Item: ST-WS2815-4PIN-RGB-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10 mm
New individually addressable RGB LED strip design at DC12v and high density 120leds/m with 10mm PCB. it is ideal for artists and DIY enthusiasts use them for installations, sculptures, and creative projects.
Item: ST-WS2815-4PIN-RGB-96-12V
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.4 mm
Power: 13.8 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10 mm
For WS2815 LED strip , we have normally 30leds/m, 60leds/m. We also developed new strip as 96leds/m, 84leds/m. 96 leds per meter is quite good for even dynamic lighting such as stage design, concerts, and theaters to create dynamic backdrops and effects.
Item: STS-TTL-3PIN-RGB-84-12V
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 6 mm
This S type LED strip is designed for sign makers to make vivid colorful channel letters , with bendable PCB it is easy to install inside the signage to make RGB visual impact.
Item: STS-TTL-3PIN-W-84-12V
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 6 mm
This white addressable LED strip has only 6mm width PCB is ideal for sign makers to creat white chasing illumination animation for their clients. DC12v and 84led per meter can supply enough voltage and dotless animation.
Item: STB-TTL-4PIN-RGB-66-12/24V
LED Qty: 66
Voltage: DC12/24V
Cutting Unit: 15.15 mm
Power: 13.2 W/m
Pixel Qty: 66 Pixels
Break Continue: Yes
PCB Width: 10 mm
Invidually addressable LED strip RGB DC24v , is ideal for long distance illumination can ensure 15 meters no voltage drop save labor cost and money.
Item: STB-TTL-4PIN-W-66-12/24V
LED Qty: 66
Voltage: DC12/24V
Cutting Unit: 15.15 mm
Power: 13.2 W/m
Pixel Qty: 66 Pixels
Break Continue: Yes
PCB Width: 10 mm
Invidually addressable LED strip white DC24v , is ideal for long distance illumination can ensure 15 meters just one side connect to LED driver no voltage drop save installation cost and money.
Item: STB-TTL-3PIN-RGB-60-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 5 mm
For narrow space addressable dynamic lighting, we develop new strip light 5mm width WS2815 LED strip with DC12v and 60leds/m .
Item: STB-TTL-3PIN-W-60-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 5 mm
For ultra thin position programmable white chasing lighting effect, you can try this WS2815 white addressable LED white color 5mm width. White color are available for 2700k, 3000k, 4000k and 6500k . We accept customization.
Item: STB-TTL-3PIN-RGB-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
Thinnest addressable LED strip with 5mm width, and high density 120leds/m . Compatible with popular pixel LED control Arduino. It has the ability to display multiple colors after programming.
Item: STB-TTL-3PIN-W-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 17.3W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
If you are looking for ultra slim addressable white LED strip we have this 120leds/m WS2815 DC12v strip light which could be programmable and popluar for entertainment industry.
Item: STB-TTL-4PIN-RGB-144-12V
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 8 mm
Our 8mm 12V 144leds Individually Controlled RGB LED Strip boasts independently addressable LEDs and Signal Breakpoint Resume Transmission for unmatched customization and dynamic RGB lighting effects.
Item: STB-TTL-4PIN-W-144-12V
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 8 mm
144leds strip in market is usually 12mm width, we can supply 8mm 12V 144leds Individually controlled white LED strip, featuring independently addressable LEDs and signal breakpoint resume transmission .
Item: STB-TTL-4PIN-W-144-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.33 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10 mm
In market the highest addressable RGB LED strip is 144leds/m but 12mm width, we developed a new high density LED strip 120leds/m addressable RGB at 10mm width, if your aluminum profile is higher than 10mm then no dot.
Item: STB-TTL-4PIN-RGB-30-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 4.3 W/m
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10 mm
This strip WS2815 is IP67 rated allowing it to be appliced outdoor. 30leds/m make it cost effective but pixel quantity is 30 piece per meter, enough for outdoor usage.
Item: STB-TTL-4PIN-RGB-60-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 33.33 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
This WS2815 LED strip we develop with 3oz PCB and each WS2815 LED has capacitor and resistors to protect input and output signal , we provide 5 years warranty , lifespan 50000 hours.
Item: STB-4PIN-RGB-60-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 8 mm
8mm width addressable LED strip designed at DC12v, each LED individually addressable . Bendable attibutes get it suitable for signage channel letters illumination, you can choose K1000c or K8000c pixel LED controller
Item: STB-6PIN-RGB-84-12V
LED Qty: 84
Voltage: DC12V
Cutting Unit: 11.9 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 10 mm
84leds per meter individually addressable LED strip is much higher density than the regular 60leds per meter WS2815 LED strip, and same width 10mm. If need uniform lighting, this is a good option.
Item: STE-4PIN-RGB-66-12/24V
LED Qty: 66
Voltage: DC12/24V
Cutting Unit: 90.9 mm
Power: 22 W/m
Pixel Qty: 66 Pixels
Break Continue: Yes
PCB Width: 10 mm
RGB LED strip individually controlled normally is WS2815 at DC12v, if you need longer running no voltage drop, we have this DC24v individually addressable LED strip RGB.
Item: STB-4PIN-W-60-12V
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
60LEDs/m 12V dual signal WS2815 individually addressable LED light strip, using SMD5050 1800K/2700K/3000K/4000K/5000K/6000K white light, customizable. Each LED is a pixel. Constant voltage driving method. SD controller, DMX controller, Artnet, etc. (SPI protocol) controller system.
Item: STB-4PIN-W-84-12V
LED Qty: 84
Voltage: DC12V
Cutting Unit: 11.9 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 10 mm
For the 5M 12V WS2815 LED strip, there is no voltage drop even if all LEDs are turned on to full white light. You don’t need to inject power as frequently as the 5V WS2812 LED strip.
Item: STB-4PIN-W-96-12V
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.41 mm
Power: 13.8 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10 mm
DC12V WS2815 IC 5050 is individually addressable. DC5V WS2812 upgraded version, comes with backup data. 256 levels of grayscale, 24-bit full color display. Signal transmission resumes at breakpoint.
Item: STB-4PIN-W-120-12V
LED Qty: 120
Voltage: DC12V
Cutting Unit: 25 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
The 12V WS2815 LED strip is similar to the version of the 5V WS2813 LED strip and is designed with one data line and a spare data line. Signal transmission resumes at breakpoint. If one of the LEDs is damaged, the following LEDs will still work.
WS2815 LED Strip Specification Download
Features
• Addressable control of individual LEDs
• High brightness and color accuracy
• Low power consumption
• Easy installation and use
• Wide range of color options
Applications
• Architectural lighting
• Stage and event lighting
• Advertising and signage
• Automotive and marine lighting
• Home and commercial lighting
WS2815 LED Strip vs. Other Addressable LED Strip
WS2815 vs SK6812
Compared with SK6812 LED strip, the WS2815 LED strip has a more stable performance due to its dual-channel data transmission. The most significant advantage of the SK6812 LED strip over the WS2815 LED strip is its broader color range.
To better understand the differences between WS2815 and SK6812, please read this article:WS2815 vs SK6812
WS2815 vs WS2812B
WS2815 is a 12V, 6-pin IC, RGB+White LED color, 4 output channels, break continues, relatively expensive addressable LED strip.
WS2812B is a 5V, 4-pin IC, RGB LED color, 3 output channels, no break continue, relatively cheap addressable LED strip. Please click the WS2815 and WS2812 differences to have a comprehensive understanding.
-
WS2815 vs WS2813
WS2815 LED strip is an updated version of WS2812B, it is DC5V with voltage drop.
The WS2815 light strip is DC12v input instead of DC5v input, and there is almost no voltage drop, which is the main difference compared with WS2813. So can run longer distances than WS2813 light strip. Click WS2813 VS WS2815 to know more differences between them.
WS2815 LED Strip Accessories
Cable Connectors
LED Strip Controllers
Related Products You May Need:
Why Choose SunTechLite
Located in Shenzhen, SunTechLite is one of the leading LED strip manufacturers in China. After 15 years of development, we have developed into a company integrating production and trade, and have won the trust and support of customers from all over the world with high-quality products and high-quality services.
Our Addressable LED light strips have the following main advantages:
- PCB thickness: SuntechLite uses 0.25mm and 0.35mm PCB for our regular strip lights. (The thickness of the general PCB on the market is 0.2mm.) The thicker the PCB board, the greater the current flowing, and the higher the efficiency of the light strip.
- High-quality Resistors: Authentic Guarantee, Antioxidant. DC12v LED strip generally uses 0.8mm*0.5mm resistors, DC24v LED strip generally uses 1.2mm*0.6mm resistors. This makes the strips have good heat dissipation, high temperature resistance, and very stable.
- Dual capacitor design: Dual capacitor design can protect the IC, and the signal transmission is stable.
- Firm light strip connection: Tin is added to the connection of the light strip, which is convenient for welding after cutting. The solder joints are full, and there will be no false welding.
Besides, we have a specialized engineering team to offer technical support and assistance with the installation and programming of the LED strips. And you can feel free to contact us if any questions in the using process.
To know more about our PCB design advantages, please click unique PCB design by Sunlite. This article has described our PCB design with detailed products and pictures in detail. And we have made a PDF profile to describe the advantages of the LED strip light, please click Suntechlite LED Strip Advantages to view details.