10mm Addressable White 120leds WS2811 LED Strip
Professional Pixel LED Strip Lights Manufacturer & Supplier
Product Parameter
| Item | Voltage | Power | Pixel Qty | LED Qty | Cutting Unit | Break Continue | PCB Width |
|---|---|---|---|---|---|---|---|
| STE-TTL-3PIN-W-120-24 | DC24V | 28.8W/m | 20 pixels/m | 120 leds/m | 50mm | No | 10mm |
10mm Addressable White 120leds WS2811 LED Strip Lighting
A 120 LEDs/m highest density WS2811 white digital led strip. WS2811 is similar to UCS1903, with 24V+, DAT, and GND 3 pin wires. The programmable white LED strip is 10mm wide, with 600 LEDs evenly distributed over the 5-meter strip length, providing an extremely uniform lighting effect.
A WS2811 IC controls 12 SMD2835 white LEDs, with one IC control area every 50 mm . 10 pixels per meter, 50 pixels per roll. Through the built-in program of the running water led controller K1000C or self-programming, the white led pixel tape can present various dynamic effects, such as flowing, breathing, bouncing, and so on.
3pin JST connector and 2 pin power cable are available. Soldering is recommended to connect the cut LED white strip.
This WS2811 white programmable white LED light strip operates from 24V DC and offers customizable color temperatures between 2700K and 6500K.
This white LED strip has a high density of 120 LED chips per meter. It provides bright, flicker-free illumination. Each external WS2811 IC chip controls 12 LED chips. The 3M adhesive backing makes installation easy.
This LED light strip is 10mm wide, with an 8mm version also available.
Each 50mm strip can be cut with scissors. Indicator lines are included on the circuit board, ensuring no damage during cutting.
This flexible LED strip can be rolled into a variety of shapes to create unique artistic designs. You can also install it in aluminum channels or neon tubes to disperse the light and create a spotless, dynamic, and pulsating effect.
WS2811 24V White Pixel LED Strip Features:
1. Addressable white LED strip light. 5m/16.4ft rolls.
2. DC24V input voltage. 3M adhesive backing.
3. One WS2811 IC controls 12 SMD2835 LEDs.
4. 120 LED chips per meter, high-density design, bright illumination.
5. 10mm width, can be cut into 50mm sections.
6. Offered in various waterproof classifications: IP20 non-waterproof, IP65 splashproof, IP67 outdoor waterproof, and IP68 underwater.
- Difference: WS2811 VS WS2812
- WS2812 LED Strip vs WS2811 LED Strip Performance Comparison
- Things to Consider When Purchasing WS2811 or WS2812 LED Light Strips
Why Choose UCS1903? UCS1903 vs WS2811
- Table Compare: UCS1903 vs WS2811 LED Strip
- UCS1903 vs WS2811 LED Strip Signal Transmission Compare
- UCS1903 and WS2811 LED Strip Remove Capacitor Video Comparison
- WS2811 VS WS2818B , What’s the difference?
- Deep Dive into WS2811 vs WS2818B LED Strips
- Choosing Between WS2811 and WS2818B
How to Drive WS2811 LED Strips with ESP8266 & FastLED?
- WS2811 Connect ESP8266 Materials Required
- ESP8266 Control Board
- WS2811 LED Strip Connection Diagram With ESP8266
- Code Upload of WS2811 Controlled with ESP8266
- Demonstration Video Display Lighting Effect
How to Control WS2811 Addressable LED Strips with Arduino?
- Materials Required WS2811 Controlled by Arduino
- ESP8266 Control Board
- Connection Diagram Arduino Control WS2811 LED
- Arduino Control WS2811 Program Code
- WS2811 Demonstration Video Lighting Effect
How to Connect WS2811 LED Strip and Controller?
Below is the wiring diagram of the pixel WS2811 white LED strip connected to the offline K-1000C LED controller.
Prepare the required equipment, mainly the WS2811 white LED strip, power supply, and controller. Prepared an adjustable voltage power supply, a K-1000C controller, and a roll of DC24V WS2811 single white LED strip.
Connect the controller to the power supply. Note that the red wire is V+ and the black wire is GND.
For more wiring details, please read our blog: How to Control Connect and Wire Addressable LED Strip?
Please pay attention to the direction of data transmission before connection to avoid reverse signal connection. (If the data transmission of the WS2811 light strip is reversed, it will cause damage to the ICs and LED beads.) The BLACK ARROWS on the light strip tell the signal transmitting direction. If connected oppositely, the strip will not work.
Related Products You May Need:
Accessories
Connection Cable
