RGB LED Strip
What is RGB LED strip? The term “RGB” stands for Red, Green, and Blue, the three primary colors of light. By adjusting the intensity of these three colors, the strip can produce a wide spectrum of colors, including white light, by mixing these primary colors in different proportions.
We supply different RGB LED strip, different density LED quantity per meter, different voltage , different PCB width and different waterproof working grade such as indoor usage IP20, moisture application IP65 and outdoor requirement IP67, what is more, underwater IP68, here is a list you can check below with recommend controllers and no soldering connectors.
If you would like to know more about the difference between RGB, RGBW and RGBCCT LED strip, please click
PCB Width: 10mm
LED Density: 60LEDs/m
Power: 14.4W/m
Voltage: 12V
Color: RGB
Waterproof Grade: IP20
This LED strip is the most classical one in the market and most widely accept one by people. It has 60 RGB LEDs per meter and DC12v design, each 3leds cuttable namely every 50mm could be cut, easy for different kinds of installation. Over their lifespan, the energy savings and lower maintenance costs of RGB LED strips can make them more economical than traditional lighting solutions.
PCB Width: 12mm
LED Density: 60LEDs/m
Power: 14.4W/m
Voltage: 24V
Color: RGB
Waterproof Grade: IP67
Despite the DC12v RGB LED strip, DC24v RGB LED strip is a typical type RGB LED strip too, the DC24v voltage can ensure longer working distance than the DC12v RGB LED strip which is normally 5 meters then has voltage drop that needs a driver to power in again, this adds extra labor cost, so a lot of people choose this DC24v type. IP67 design is quite suitable for outdoor application.
PCB Width: 12mm
LED Density: 120LEDs/m
Power: 16W/m
Voltage: 24V
Color: RGB
Waterproof Grade: IP67
For some position if the LED strip to surface needs to be illuminated is less than 10mm, then this 120leds per meter DC24v RGB LED strip is the best choice to ensure dotless and uniform lighting. People will feel much happy while live in this environment. IP67 design make this strip could be applied in in saunas and other high-temperature locations due to their ability to withstand extreme heat and humidity.
PCB Width: 8mm
LED Density: 120LEDs/m
Power: 16W/m
Voltage: 24V
Color: RGB
Waterproof Grade: IP65
If the site you are going to install RGB LED strip less than 10mm, then classical 10mm width LED strip cannot be applied, you can choose this 8mm width LED strip with high density 120 leds RGB per meter. With normal PWM 3 channel LED controllers in the market easy to handle and produce a colorful environment. 120leds per meter means each 50mm cuttable, easy for installation.
PCB Width: 10mm
LED Density: 144LEDs/m
Power: 14.4W/m
Voltage: 24V
Color: RGB
Waterproof Grade: IP68
Now we have the most density RGB LED strip 144leds per meter, after IP68 waterproof production the width is only 10mm so best choice for outdoor use with narrow PCB width requirement. Each 42mm cuttable. High quality LED RGB SMD3535 with San ‘an chip. Life could be 50000 hours and 5 years warranty, suitable for important project application.
PCB Width: 5mm
LED Density: 120LEDs/m
Power: 9.6W/m
Voltage: 12V
Color: RGB
Waterproof Grade: IP20
Here we have this thinnest RGB LED strip in market only 5mm PCB width, ideal for mood lighting such as furniture, toy, gaming, computer industry. 12v design each 3 leds cuttable and 25mm cuttable, quite easy for DIY job, allowing you to customize the strip length to fit a specific project.
PCB Width: 10mm
LED Density: 72LEDs/m
Power: 8W/m
Voltage: 24V
Color: RGB
Waterproof Grade: IP20
24V DC constant current RGB LED light strip, 8W/m, 72LED/m, 10m, IP20, SMD5050. Uniform light, high brightness, unique and sturdy PCB design. Like the Constant Voltage Strip, 6 LEDs (83.33mm) apart can be cut freely. The current is stable and suitable for projects with high quality requirements.