H801RC LED Controller

H801RC is a slave controller that transmits data based on Ethernet protocol. Data is input from the master controller or computer to NET1 and output from NET2. H801RC has 8 output ports and can drive up to 8192 pixels. It can be connected to a computer or master controller.

(1). The 8 output ports can drive a maximum of 8192 pixels. The number of pixels that each port can drive is 8192 divided by the number of ports in use. The number of ports can be 1, 2, 4, or 8 (i.e., you can choose “one slave, one line”, “four slaves, one line”, or “eight slaves, one line” in the LED Build software)
(2). H801RC can work online or offline and can be connected to computers, master controllers, switches, photoelectric converters, etc.
(3). High synchronization performance, the transmission delay between adjacent slave controllers is less than 400ns, and the image has no tearing or mosaic phenomenon.
(4). Good control effect and precise grayscale control.
(5). Long transmission distance, data transmission based on standard Ethernet protocol, the nominal transmission distance between adjacent controllers can reach 100 meters.
(6). The clock scanning frequency is adjustable from 100K to 50MHz.
(7). The grayscale and anti-gamma correction technology is used to make the actual display effect more in line with human physiological sensations.