WS2811/60leds/m/DC12V LED Strip Advantages From Suntechlite
Full Solder Joints
Backside Lamination
Signal Input Protected
Signal Output Protected
Genuine 3M Adhesive
National Standard Wire usually is 1.8mm/20AWG
Wire Diameter is 0.15mm*26pcs
PCB Board Thickness is 35+70oz copper
WS2811/60leds/m/DC12V LED Strip-Other Manufacturers
Solder Joints are not full
Backside Oil Coating
Signal Input Unprotected and Unfiltered
Signal Output Unprotected and Unfiltered
General Economy Backing
Non-standard Wire usually is 1.7mm/24AWG
Wire Diameter is 0.12mm*17pcs
PCB Thickness is 25+25oz or 18+18oz
Suntechlite VS Other Manufacturers
Suntechlite LED strips are durable, safe and high performance.
- Thicker copper foil , 25+50, double-sided lamination, ensures heat dissipation, capacitance and protection against physical/environmental damage.
- Integrated protection resistors protect signals during power fluctuations, minimizing the risk of failure.
- Full SMT solder joints and thicker wiring (0.15mm×26pcs) to maximize component stability and current handling capabilities.
- 3M 300LSE tape, ensures a strong, long-lasting bond even in harsh conditions.
If you want to buy addressableLED strip or looking for high quality pixel led strip, please contact us!
Please check the WS2811 LED Strip link below:
WS2811: https://suntechlite.com/ws2811-led-strip/
UCS1903: https://suntechlite.com/ucs1903-led-strip/
Individually controlled addressable LED strip: https://suntechlite.com/individually-controlled-led-strip/
RGB addressable LED strip: https://suntechlite.com/addressable-rgb-led-strip/