Ultra Wide Addressable Double Row UCS7604 RGBW No Voltage Drop LED Tape Light

UCS7604 IC is a high grey scale 65535 IC with scan rate at1600Hz , support as most 4 channels namely RGBW ,  each channel can reach to at most 60mA. While it used for LED strip can be designed as 5v, 12v, 24v and at most 30v. 

The UCS7604 also uses a patented dual decoding engine to monitor 2 channels at the same time, and if any channel signal is a problem, it will be switched in real time, namely, break continue function. The RGBW channel output of UCS7604 adopts a 65535-level grayscale output and has an independent current adjustment function for each channel.

Our UCS7604 RGBW LED strip has 144leds/m and 24pixels/m at 10mm width PCB.  Unlike the UCS2904 LED strip, which is 3 PIN, if one IC is dead, the whole system cannot run. The UCS7604 is like WS2815 with a data backup function; if one IC is dead, the signal can still pass through.

Our 24V RGBW addressable LED strips use the UCS7604 IC to control 5050 high-brightness LED chips. Precise control of each pixel’s color, brightness, and dynamic lighting effects.

Our 24V RGBW addressable LED strips have 144 LEDs per meter.

The UCS7604 IC has a backup data transfer function. This can ensure smooth operation of the entire lighting system. Each UCS7604 IC controls six 5050 LEDs. A variety of animation effects, including color gradients, chasing, blinking, and breathing effects, is available.

Four RGBW channels offer a wide range of colors and pure white for user selection. You can use an RGBW SPI LED controller to adjust the colors and animation effects of this latest RGBW addressable LED strip. The UCS7604 LED strip offers a variety of dynamic lighting effects. Widely used for advertising, signage, commercial, and residential lighting.

In addition, each LED can be individually cut at 41.67mm intervals. Flexibility for various installation methods. The PCB is 10mm wide and can be embedded in aluminum channels (with an inner width of ≥ 10mm). When used with aluminum channels, this UCS7604 24V RGBW LED strip creates dynamic linear lighting.

24V 144LEDs/m RGBW Ultra Wide Double Row UCS7604 Break Continue LED Strip Features

1. Each UCS7604 IC controls six 5050 LED with addressable RGBW colors.

2. LED density: 144 LEDs per meter.

3. Can be cut, available in 41.67mm increments.

4. Features 65535-level grayscale output and independent current regulation for each channel.

5. The UCS7604 has a 1600Hz PWM frequency and an 800kbps data rate.

6. Waterproof ratings: IP20, IP65, IP67, and IP68, making it ideal for smart RGBW outdoor lighting.

LED Strip + Controller + Power Supply: 5m RGBW LED Strip +SP649 LED Controller + LRS-100-24 Power Supply

WS2814 vs TM1814 vs UCS2904 vs UCS7604

• WS2814 vs TM1814 vs UCS2904 vs UCS7604, What’s the difference?
• Deep Dive into WS2814 vs TM1814 vs UCS2904 vs UCS7604 LED Strips
• Choosing Between WS2814 vs TM1814 vs UCS2904 vs UCS7604

Addressable LED Strip Unique PCB Design by Suntechlite

• 24V UCS2904 RGBW LED Strip
• 24V DMX RGBW LED Strip
• 24V UCS2903 Addressable RGB LED Strip
• 24V UCS7604 Addressable RGBW LED Strip

How to Check LED Strip Quality?

• LED strip PCB thickness
• Resistor
• Capacitor
• LED strip connection
• Back side of the PCB board
• Wire
• Connector

Individually Addressable LED Strip Guide RGB RGBW and Controllers

• Types of Individually Addressable LED Strips
• Built-in RGB Addressable LED Strips
• External RGB Addressable LED Strips GS8208
• RGBW Addressable LED Strips
• Addressable LED Controllers Explained
• Master and slave control all-in-one machine
• Mobile & App-Based Controllers
• Main Controller + Sub-Controller
• Madrix Artnet & Networked Controllers
• GPS Main controller + Sub-Controller
• Comparing RGB vs RGBW Addressable LED Strips
• Installation Tips for Addressable LED Strips