UCS7624L Specification Datasheet Free Download

UCS7624L RGBW LED Driver IC Overview

The UCS7624L is a 4-channel, 65536-level grayscale RGBW LED driver IC in a SOP10 package. It uses dual-channel defective pixel resumable data transfer, so one faulty pixel will not break the signal for the rest of the run. That is why we build our UCS7624 LED strip around it for long outdoor runs and architectural projects where a single dead pixel cannot be reached for repair.

Key parameters are listed below. Full electrical characteristics, pin descriptions and timing diagrams are in the downloadable datasheet PDF.

UCS7624L Key Specifications

Parameter Value
IC type 4‑channel RGBW LED driver IC
Grayscale 65536‑level, 8‑bit / 16‑bit (built‑in gamma 2.2)
Package SOP10
Output current 0‑64 mA, 16‑level per channel, set by REXT resistor
Constant current accuracy ±5%
Refresh rate 16K or 32K
Data transmission 800 kbps / 1.6 Mbps
Fault tolerance Dual‑channel defective pixel resumable data transfer (>99% fault recognition)
Output port voltage Up to 40 V (built‑in 5 V regulator at VDD)
ESD protection 8000 V (HBM)
Operating temperature ‑40°C to +85°C

Why Break-Point Continue Matters on Long Runs

Most single-wire driver ICs pass data through one channel, so one dead pixel cuts the signal for every LED behind it. On a fifty meter facade or a bridge railing, that means scaffolding, a night callout and an angry client. The UCS7624L solves this with dual-channel defective pixel resumable data transfer: when a pixel stops responding, the IC recognises the fault with over 99% accuracy and routes the data around it, so the rest of the run keeps playing.

This is also why the IC carries 8000 V ESD protection in the HBM class. Installation sites are harsh, and static from handling, cable pulling or nearby equipment kills cheap ICs before the first power on. Combined with the wide operating temperature range, these three features are what make the UCS7624L family suitable for outdoor projects where repairs are expensive.

The same break-continue idea appears across our product range. Our UCS7604 break continue LED strip and the TM1934 break continue LED strip build the same insurance into different pixel formats, and the WS2813 vs WS2814 vs WS2815 comparison covers how the classic Worldsemi ICs handle the same problem.

UCS7624L Inside Finished LED Strips

Seeing the silicon in a shipping product makes the spec easier to judge. Our UCS7624 LED strip and the UCS7624 addressable ultra wide LED strip both build around this driver IC, so every datasheet claim can be checked against real output. The ultra wide double row UCS7604 RGBW no voltage drop tape shows the same break-continue architecture applied to a no voltage drop format for extra long runs, and the UCS2904 LED strip covers projects that need the four-channel RGBW idea at a different pixel density.

Learn More Before You Specify

FAQ

What is the UCS7624L LED driver IC?
The UCS7624L is a 4-channel RGBW LED driver IC in a SOP10 package. It delivers 65536-level grayscale in 8-bit or 16-bit mode with built-in gamma 2.2 correction, and its ports handle up to 40V with an internal 5V regulator.

What does break-point continue mean on the UCS7624L?
The IC uses dual-channel defective pixel resumable data transfer with over 99% fault recognition. If one pixel fails, the signal routes around it, so every LED after the dead one keeps running. Outdoor installs stay lit without urgent repair.

How do I set the UCS7624L output current?
Output current spans 0 to 64 mA with 16 adjustable levels per channel, set by the REXT resistor. Constant current accuracy stays within plus or minus 5%, which keeps brightness and color consistent across every pixel on the strip.

 What refresh rate and data speed does the UCS7624L support?
The IC refreshes at 16K or 32K and moves data at 800 kbps or 1.6 Mbps. High refresh modes keep output flicker free in front of cameras, and faster transfer suits dense runs where each meter carries more ICs.

Which LED strips use the UCS7624L driver IC?
We build the UCS7624 LED strip family around this IC for long outdoor runs and architectural projects, where a single dead pixel cannot be reached for repair. Download the datasheet PDF here and request bulk pricing from our team.

Share To

Enquiry