SPI Pixel Lighting Remote Transmitter Receiver Amplifier
Product Code: BC-LR01
Welcome to use the SPI single channel remote transmitter/receiver.
This model is designed for the SPI signal due to the distance is not enough.
The transmitter is a TTL to differential signal output, and the receiver is a differential signal to TTL.
In this way, it can solve the problem of SPI signal distance limitation in many projects. It’s simple and small, easy to solder.
Product Features
| Model | SPI single channel remote transmitter | SPI single channel remote receiver |
|---|---|---|
| Input voltage | 5V-24V | |
| Input signal | TTL (SPI) | Differential signal |
| Output signal | Differential signal | TTL (SPI) |
| Input signal interface type | Pad (Wire bonding can be made according to customer needs) | Pad (2P terminals or wires can be welded according to customer needs) |
| Output signal interface type | Pad (2P terminals or wires can be welded according to customer needs) | Pad (Wire bonding can be made according to customer needs) |
| Working Temp | -20°C~55°C | |
| Dimension | L31 × W10 × H5 (mm) | |
| Weight(G.W.) | 2g | |
Basic Features
- 5V-24V input, suitable for a variety of engineering wiring voltages.
- Both input and output have protection circuits.
- Differential signal input and output.
- The 3P pads can be welded directly to the LED strip or wire, and the 2P pads can be welded to the terminals with a 5mm pitch and wires.
- The wiring distance between the transmitter and receiver can exceed 100 meters.
Conjunction Diagram
It is suitable for remote amplification transmission of single-wire SPI signals. If the distance of the controller SPI signal output is not enough, the transmitter can be connected. Then the receiver can be used to receive the signal, which can solve the problem of insufficient distance in engineering. Connect as shown in the following figure:
