MR 3F23S GPS DMX LED Controller

MR-228DW DMX Sub-controller Controller

  • Support DMX512AP-N / NB, UCS512, MY7221, WS2821 and Other Driver Chips
  • Support R,RB, RGB,RGBW, RGBWY,and Multi-Color Mixing Control
  • 8-Port OutPut, Single Channel 512 Channels
  • Support Backup, Single Device Failure or Network Cable Disconnection Has no Effect
  • Support Overcurrent and Overvoltage Protection

MR-228DW DMX Sub-controller Controller Appearance

MR 228DW DMX Sub controller Controller Appearance

1. Power Switch; 2. LCD Display; 3. Power Lights; 5 and 6. Self-adapting Network Interface; 7. DMX OutPut Port; 8. ower Interface

Install and Use

Online mode (Connected With The Computer )

MR-228DW Controllerd Connect With The Computer Ethernet Port,as Shown Below:

MR 228DW DMX Sub controller Online mode

Offline Mode

MR-228DW Connect With the Offline Master Controller,as Shown Below:

MR 228DW Connect With the Offline Master Controller

Integrated synchronous and Asynchronous Mode

Connect With the Computer and The Main Control (Online Priority. No Signal SwitchOffline), as Shown in The Following Figure:

MR 228DW Integrated synchronous and Asynchronous Mode

Engineering Case Description and Sketch Map

For Example in DMX512 Point Light Source Composed of 96 Points× 18 Dots Matrix Screen, Use MR-228DW Controller, The Wiring is Arranged in The Vertical S Type, Controller for Each Output Port to Control 3 lines Point Light Source, Totally Need of 32DMX512 interfaces. The Following Diagram for Example:

MR 228DW Engineering Case Description and Sketch Map

Enquiry