H833SA Music Panel Touch Pixel Controller
- Eight output ports
- SD card supports FAT32 and FAT16 formats
- Can switch files or adjust playback speed based on music rhythm
- Audio input supports both microphone and audio line input
- Supports DMX512 chip address programming
- DMX512, HDMX, TM512, TM1803, TM1804, TM1809, TM1812, TM1913, TM1914, TM1926, TM1814, WS2811, WS2812, WS2813, SM16703, SM16709, SM16712, SM16704, SM1651X, UCS1903, UCS1909, UCS1912, UCS5603, UCS512, UCS8904, SK9816, GW6205, LPD1883, QED3110, etc
Product Description
The H833SA Wall Panel Music Controller can control various single-wire driver chips and DMX512 chips. It features 8 output ports, can control up to 8192 points, and supports DMX chip address programming.
It is compatible with multiple 12V wall panels and allows DIY input for new wall panels with similar communication protocols. Audio input supports both microphone and audio line input. The wall panel selects folders (scenes), adjust brightness, switch files (effects), and choose colors.
Folder names are labeled as 1, 2, 3, …, 16, with a maximum of 16 folders, each containing up to 64 files. Audio rhythm can be used to switch DAT files or control playback speed.
For the Cy wall panel, the switches correspond to folders 15 and 16. For the Nor wall panel, the “All On” and “All Off” buttons correspond to folders 4 and 5, respectively. If a wall panel button corresponds to an empty folder, pressing it will turn off the lights. The Nor wall panel’s red, green, and blue buttons will only function correctly when using the “LED Programming Software” version 5.07 or higher; otherwise, they will only represent pixel points.
The 12V wall panel interface is an RJ45 (single Ethernet port, located on the right side of the front panel). The pinout is as follows:
Pin 1: Signal –
Pin 2: Signal +
Pins 3 and 6: GND
Pins 4 and 5: +12V output
Note: The 12V wall panel interface can only connect to wall panels with matching pinouts and voltage. Do not connect other devices. Use parallel crimping for the network cable.
H833SA Performance Features:
1. Eight output ports, each capable of controlling 1024 points, totaling 8192 points.
2. SD card supports FAT32 and FAT16 formats, with a maximum capacity of 32GB. Up to 16 folders are allowed, each containing 64 DAT files.
3 . Supports 12V wall panels for selecting folders (scenes), adjusting brightness, switching files (effects), choosing colors, or turning off lights.
4. Can switch files or adjust playback speed based on music rhythm.
5. Each folder (scene) can be configured with different music rhythm functions and trigger beat counts.
6. Audio input supports both microphone and audio line input.
7. Supports DMX512 chip address programming.
8. Includes a pixel counting function and can test RGB order.
9. Supports firmware upgrades.
10. Can simultaneously output DMX data to control DMX fixtures.
Controllable Driver Chips：
DMX512, HDMX, TM512, TM1803, TM1804, TM1809, TM1812, TM1913, TM1914, TM1926, TM1814, WS2811, WS2812, WS2813, SM16703, SM16709, SM16712, SM16704, SM1651X, UCS1903, UCS1909, UCS1912, UCS5603, UCS512, UCS8904, SK9816, GW6205, LPD1883, QED3110, etc
