Dual Double Data Signal Break Resume Addressable LED Strip

A dual double data signal break resume addressable LED strip is an LED strip with 4 pins.

Two of the pins are dedicated to data lines: one is the main data line and the other is the backup data line. The dual data signal transmission design ensures that the entire strip continues to operate normally even if one LED fails to work properly.

How Dual Data Backup Works

If the main data signal transmission fails, the backup data line will take over and continue to transmit the signal. Keep the signal flowing normally to the subsequent LEDs. Ensure that the rest of the strip continues to work without interruption.

Here is a schematic of a dual double data signal WS2818 LED strip.

Dual double data signal WS2818 LED strip
Dual double data signal WS2818 LED strip

DMX Addressable LED Strips

DMX addressable LED strips are equipped with dual data lines, data A and data B. It is used in entertainment lighting, concerts, and stage installations. DMX signal transmission is highly stable. Dual data lines ensure that even if there is a problem with the main data transmission, the backup signal can keep the lighting effect smooth and uninterrupted.

WS2818 TM1934 UCS5603 Addressable LED Strip

The WS2818 LED strip utilizes a 4-pin system where the dual data backup plays a key role in ensuring reliability. The two data lines ensure that, in the case of data path interruption, the LED strip continues to work properly. TM1934 is commonly used in architectural lighting, hotel lobby and landscape lighting. Because TM1934 LED can provide uniform high-quality lighting effects.

Individually Addressable WS2813 and WS2815 LED Strips

WS2813 is a 5V individually addressable LED strip with dual data backup. WS2813 LED strip can be considered for indoor accent lighting, home decoration and art display installation.
WS2815 is a 12V version of WS2813. It has the added advantage of reducing voltage drop when running for long periods of time and over long distances. For long-time or long-distance lighting installations, please give priority to WS2815 LED strips.

Table of Contents

DMX LED Strip

Item: ST-DMX-5PIN-RGB-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50mm

Power: 14.4 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

5meters 60LEDs/m DMX512 RGB led strip lights for sale, with 12V+ GND A B P 5CH wires. The 12V DMX led strip supports the operation mode of the first installation and then writing code, and any animation effects can be realized through the artnet dmx controller programming. 

Item: ST-DMX-5PIN-RGB-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

1. Low voltage DC24V which can make sure longer running distance to 10 meters same rightness, also energy-saving and environmentally friendly.
2. Adopts high-quality material, make high bright 5050 RGB LED chips, based on flexible FPC substrate, with the advantage of good conductivity, faster heat dissipation, bending resistance, easy to get the shape you need. 

Item: ST-DMX-5PIN-RGB-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 33.3mm

Power: 14.4 W/m 
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC12v 60leds per meter 30 pixels per meter, it is a unique design compared to DMX 12v 60leds per meter and 20 pixels per meter LED strip in the market.
A dual data signal 5 pin dmx controlled RGB rope light with 60 LEDs per meter, DC 12 volts power input. Each 2-LED segment of this dmx RGB led tape is controlled by a 10-pin UCS512 DMX512 IC

Item: ST-DMX-5PIN-RGB-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 33.3mm

Power: 14.4 W/m 
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC24v 60leds per meter 30 pixels per meter, it is a unique design compared to DMX 24v 60leds per meter and 10 pixels per meter LED strip in the market.
This High Bright DMX RGB LED Strip for your building lighting decorations, with a special 24v LED strip but with each 2 leds cuttable instead of 6 leds cuttable. LEDs design, high brightness.

Item: ST-DMX-5PIN-RGB-72-24
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

Please pay attention this strip is 8mm width and 72leds per meter, it is a unique design compared to DMX 24v 60leds per meter and 10 mm width LED strip in the market.
5 meters DC24V 72LEDs/m dmx controlled led tape light for sale, 8mm PCB wide, each 6 RGB lights can be cut at each 83mm. 1 pixel =6 LEDs, 60 pixels a roll 5 meters.

Item: ST-DMX-5PIN-RGB-120-24
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100mm

Power: 28 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this strip is DC24v 10mm width and 120leds per meter, it is a unique design compared to DMX 24v 10 mm width and 60leds per meter LED strip in the market.
A higher density 120LEDs/m 2835 RGB DMX 512 led strip. It adapts 3in1 5050 RGB multi-color LED as light source, having more color possibilities.

Item: ST-DMX-5PIN-RGBW-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 19.2 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

Please pay attention this RGBW DMX strip is DC24v 10mm width and 60leds per meter, it is a unique design compared to DMX 24v 12 mm width and 60leds per meter LED strip in the market.
DMX LED strip lights are with low power consumption, it only consumes 19.2W per meter, and 96W per roll.

Item: ST-DMX-5PIN-W-60-12
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50mm

Power: 14.4 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters DMX controlled led strip for sale. The DMX512 IC can support this each IC 3 channels . You can use dmx controller, Artnet controller, Madrix console, or GPS signal to control the dmx lighting. 
It adapts 3in1 5050 white color LED as light source, high brightness and low power consumption.

Item: ST-DMX-5PIN-W-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters DMX controlled led strip for sale. The DMX512 IC can support this each IC 3 channels . You can use dmx controller, Artnet controller, Madrix console, or GPS signal to control the dmx lighting. 
It adapts 3in1 5050 white color LED as light source, high brightness and low power consumption.

Item: ST-DMX-5PIN-W-72-24
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

5 meters 72LEDs/m addressable white DMX light strip for sale. You can edit programs via the artnet dmx controller to design the lighting effects as you like. 
This white color which is available in 3000k, 4000k, 5000k and 6000k can is addressable dmx led rope light adapts bright 5050SMD LEDs and external DMX512 ICs, more stable.

Item: ST-DMX-5PIN-WWA-60-24
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

5 meters per roll LED color temperature addressable 3-in-1 CCT DMX 512 tunable white led light strip for sale. There are 60 CCT lights per meter (10 ICs in one meter), 6 LED lights can be cut, 100mm cut length. 1 pixel = 6 lights, 50 pixels per roll. 

Item: ST-DMX-5PIN-CCT-60-12
LED Qty: 60 
Voltage: DC12V
Cutting Unit: 50 mm

Power: 19.2 W/m 
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm

DMX control CCT/WWA white addressable led lights, this dmx tunable white led strip adapts 3in1 CCT SMD LEDs, the LED color temperature can be adjusted from 2700K warm white, 4000k natural white to 6500K daylight. And various color temperatures dynamic modes can be displayed on the strip light. 

Item: ST-DMX-CCT-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10mm

This is the DMX 512 CCT digital led strip light that different from normal SPI pixel led strip lights. Its signal protocol is parallel not series, which can avoid the failure of one light in serial connection resulting in non-operation.

Item: ST-DMX-CCT-72-24V
LED Qty: 72
Voltage: DC24V
Cutting Unit: 83.3mm

Power: 17.3 W/m 
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 8mm

DMX control CCT/WWA white addressable led lights, this dmx tunable white led strip adapts 3in1 CCT SMD LEDs, the LED color temperature can be adjusted from 2700K warm white, 4000k natural white to 6500K daylight. And various color temperatures dynamic modes can be displayed on the strip light. 

Item: ST-DMX-5PIN-UV-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100mm

Wavelength: 365nm/395nm
Pixel Qty: 10 Pixels
Power: 14.4 W/m 
Break Continue: Yes

SMD5050 UV LEDs are used, which is different from ordinary SMD5050 RGB or RGBW, different wavelength black light wavelength 365nm and 395nm are both for options which can generate mysterious atmosphere for night club lighting.

External WS2818 RGB LED Strip

Item: STE-TTL-4PIN-RGB-60-12/24V; STE-TTL-4PIN-RGB-72-12/24V
LED Qty: 60/72
Voltage: DC12/24V
Cutting Unit: 41.6/50/83.3/100 mm

Power: 14.4/17.2 W/m 
Pixel Qty: 60/72 Pixels
Break Continue: Yes
PCB Width: 8/10 mm

WS2818 Arduino LED Strip is a dynamic lighting solution that seamlessly integrates with Arduino platforms, providing unparalleled control and customization. With its advanced WS2818 chip, this strip offers versatile programming possibilities and precise color temperature adjustments, making it a perfect choice for your creative lighting projects.

Item: ST-WS2818-4PIN-RGB-72-12V
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm

Power: 17.2 W/m 
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8 mm

72leds/m RGB addressable LED strip with backup function better than WS2811 which has only one signal cable , this strip has dual signal to make it better signal transmission. The 8mm width ensures versatility, making it an ideal choice for both creative projects and ambient lighting schemes.

Item: STB-4PIN-RGB-120-24V
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100 mm

Power: 10 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 5 mm

This 5mm LED strip 120leds/m with backup function is 10w per meter, and high density 120leds/m 10pixels/m , could be used for narrow places. 

Item: STE-4PIN-RGB-120-24V
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100 mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10 mm

For less power at 120leds/m neon tube application we have the 14w/m 120leds/m WS2818 LED strip , no hot while inside the neon tube which makes it longer lifespan. 

FW1935 LED Strip

Item: STE-TTL-4PIN-RGB-60-12/24V
LED Qty: 60
Voltage: DC12/24V
Cutting Unit: 50/100 mm

Power: 14.4 W/m 
Pixel Qty: 20/10 Pixels
Break Continue: Yes
PCB Width: 10 mm

The FW1935 LED strip is addressable light, breakpoint- continue, and can be programmed and controlled by the help of controller. Dual signal line version and signal breakpoint continuous transmission. If a LED damage, the work of other LEDs will not be affected.

Item: STE-4PIN-W-120-24V
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100 mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10 mm

This addressable white strip with 120leds/m and 10pixels/m, normaly 120leds/m pixel white LED strip has 20pixels/m which power consumption reaches to 28w/m which is very hot.  However, this strip only consumption 14.4w/m, no hot and longer lifespan  making a ideal choice for neon lighting which heat dissipation is not good becaused of closed space inside.

TM1934 LED Strip

Item: STE-TTL-4PIN-RGB-60/72-12/24V
LED Qty: 60/72
Voltage: DC12/24V
Cutting Unit: 41.6/50/83.3/100 mm

Power: 14.4/17.2 W/m 
Pixel Qty: 10/12/20/24 Pixels
Break Continue: Yes
PCB Width: 8/10 mm

The most notable feature of TM1934 LED strip is its pixel break-continue function. If one LED on the light strip is broken, the backup signal channel will continue to transmit data to the next normal LED, which will not affect the normal work of other LEDs.

Item: STE-4PIN-RGB-120-24V
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100 mm

Power: 10 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 5 mm

This 5mm width LED strip 120leds/m with backup function is 10w per meter, and high density 120leds/m 10pixels/m, could be used for narrow places.  This strip can be made to 20m (65.6ft) long addressable led strip with 120 LEDs per meter, the 2835 RGB LED is controlled by TM1934A external IC, 10mm PCB width. TM1934A is similar to WS2818, with two data transmission wires. 

Item: STE-4PIN-RGB-120-24V
LED Qty: 120
Voltage: DC24V
Cutting Unit: 100 mm

Power: 14.4 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10 mm

This 65ft 20meters long RGBIC LED strip ensures consistent light color and brightness along its entire 20-meter running length, with no voltage drop (RGB white state with a little). Such a 20m addressable led strip only needs to be powered at one end, reducing the complexity of wiring, ideal for large programmable lighting projects.

External UCS7604 RGBW LED Strip

Item: ST-UCS7604-4PIN-RGBW-60-24V
LED Qty: 60
Voltage: DC24V
Cutting Unit: 100 mm

Power: 19.2 W/m 
Pixel Qty: 10 Pixels
Break Continue: Yes
PCB Width: 10 mm

The UCS7604 also uses a patented dual decoding engine to monitor 2 channels at the same time, and if any channel signal there is a problem, it will be switched in real time namely break continue function. The RGBW channel output of UCS7604 adopts 65535-level grayscale output and has independent current adjustment function for each channel.

WS2813 LED Strip