5mm 120leds DC12V 120 Pixels WS2815 Addressable White LED Strip
Product Parameter
Item: STB-4PIN-W-120-12V
Voltage: DC 12V
Power: 17.3 W/M
Pixel Quantity: 120 pixels/m
LED Quantity: 120 LEDs/m
Cutting Unit: 8.33 mm
Break Continue: Yes
PCB Width: 5 mm
5mm 120leds DC12V 120 Pixels WS2815 Addressable White LED Strip Pictures
The 12V WS2815 LED strip is similar to the version of the 5V WS2813 LED strip and is designed with one data line and a spare data line. Signal transmission resumes at the breakpoint. If one of the LEDs is damaged, the following LEDs will still work. Each LED can be cut off at the cutting line.
There are 4-pin JST SM connectors and separate power/ground wires on both ends, making it easy to connect and power.
5mm White WS2815 Programmable LED Strip Feature
- This 5mm WS2815 addressable white LED strip is specifically designed for lighting ultra narrow, delicate, and ultra small spaces.
- Built-in IC, individually addressable, and 256 grayscale levels. One cutting unit for every 3 LEDs. Cuttable every 8.33mm.
- Resumable download function. Enhanced anti-interference capabilities.
- This compact, ultra-thin WS2815 LED strip uses a 12V power input and features one individually programmable 3535 LED. The density is 120 LEDs per meter. Each LED houses a WS2815 IC. Represent a single pixel. Therefore, this tiny 12V ultra-thin LED strip has 600 pixels per 5-meter/16-foot roll.
- High refresh rate, suitable for fast-response dynamic lighting.
- The narrow 5mm width makes this WS2815 LED strip great for narrow letter channel lighting and other arc lighting. The 12V power supply allows for longer run lengths with virtually no voltage drop over a 5m length.
- Wide compatibility: Supports multiple control platforms (such as Arduino, Raspberry Pi, ESP32, and ESP8266).
How to control and wire WS2815 LED strip?
Both the WS2815 and WS2813 LED strips can be controlled individually and have breakpoint-resume features. But the WS2815 LED strip is DC12V, so it can keep its brightness and current stable over a longer distance. WS2815 is better for bigger lighting projects.
It’s a 4-wire addressable LED strip, with two wires for power and two wires for data. The picture below shows how the WS2815 RGB LED strip is connected to an LED controller.
WS2815 DC12V LED Strip Recommended LED Controller: K-1000C, SP105E, SP107E, SP110E.
WS2815 IC Chips Specifications Download PDF
- Quick Table: WS2815 vs WS2812B
- Quickly Identify WS2815 vs WS2812B LED Strip
- Application: Which to Choose, WS2815 or WS2812B?
- Differences: WS2813 vs WS2815
- Similarities: WS2813 vs WS2815
- Recommended controller
WS2815 Everything You Need To Know
- WS2815 Technical Specifications
- WS2815 LED Strip Benefits
- Advantages of Using WS2815 LED Strip
- Types of WS2815 LED Strip
- Wiring WS2815 LED Strip
- Different Options of RGBIC LED Strip Lights: Which One To Choose
- What to Consider When Choosing Addressable RGB LED Strip
- How To Use WS2815 LED Strip: Ultimate Guide
- Why Choose SuntechLite For Quality Digital LED Strip
- WS2813 vs WS2814 vs WS2815, What’s the difference?
- Deep Dive into WS2813, WS2814, and WS2815 LED Strips
- Choosing Between WS2813 vs WS2814 vs WS2815
- SK6813 vs SK6813H vs WS2815, What’s the difference?
- Better Understanding of SK6813,SK6813H and WS2815 LED Strip
- Which one is the best choice: SK6813, SK6813H, and WS2815?
WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Chips
- WS2815 vs. WS2812 vs. WS2818 LED Strip
- Applications: WS2815 vs. WS2812 vs. WS2818 LED Strips
- WS2815 vs. WS2812 vs. WS2818 LED Strip Installation Tips
- Pros and Cons Summary WS2815 vs. WS2812 vs. WS2818
- Choosing the Right LED Strip for Your Needs
Power Consumption of WS2811 WS2812B WS2813 WS2815 & SK6812
Program WS2815 Individually Addressable LED Strips with Raspberry Pi
LED Strip Waterproof Level Description
Suntechlite provides addressable LED strips in various waterproof ratings. More information about waterproof levels, please click here, LED Strip IP20 VS IP65 VS IP67 VS IP54 VS IP68.
Select Recommendation:
– Kitchen/bathroom → at least IP65
– Poolside → start with IP67
– Long-term underwater use → IP68 certified products
IP20: Non-waterproof. The PCB surface is completely exposed. With a 3M self-adhesive backing. Suitable for indoor use.
IP54: Limited waterproofing. The PCB surface is covered with a waterproof silicone coating. Moderate dust and limited splash protection. The backing has a 3M self-adhesive backing, making it suitable for use in environments with occasional moisture. Suitable for general indoor environments, but not for extremely humid or dusty environments.
IP65: Waterproof. Epoxy resin coating, the PCB surface is encapsulated with plastic, and the backing has a 3M self-adhesive backing. Suitable for indoor and outdoor use.
IP67: Waterproof. Silicone sleeve, the PCB is encapsulated with a silicone tube and equipped with plastic fasteners for enhanced waterproof performance. Suitable for outdoor use.
IP68: Waterproof. Fully encapsulated with plastic, both the PCB surface and back are encapsulated with plastic, equipped with plastic fasteners. Highest waterproof rating. Suitable for outdoor use.
5mm Ultra Narrow Addressable LED Strip Application
Ultra-thin addressable LED strips are widely used in extremely narrow spaces, such as ambient lighting, TV backlights, and home decoration. They can also be used with our Neon Tube LED Diffuser to achieve spotless lighting.
Or you can choose our ultra-narrow thin COB addressable LED strips to achieve spotless lighting effects.
Click to buy a neon diffuser 5mm LED strip inside for the aluminum channel application. For more customized requirements, please contact our team of dedicated LED engineers.
Suntechlite LED VS Other Manufacturers
Why Choose Suntechlite WS2815 LED Strip?
| Comparison Items | Suntechlite | Other Manufacturers | Variance Analysis |
|---|---|---|---|
| PCB • Copper foil thickness • Plate making process • Circuit safety • SMT process |
35+70 oz copper | 25+25 oz or 18+18 oz copper | The thicker the copper foil, the higher the power capacity and the better the heat dissipation of the light board. |
| Double-sided lamination | Front film coating, back oil coating | Lamination helps prevent physical damage, isolates from environmental aggression, improves flexibility, and resists high temperatures. | |
| Signal with protection resistor and filter capacitor | No protection resistor / no filter capacitor | Protection resistors and filter capacitors limit inrush current and suppress noise, improving anti-interference and preventing screen flicker. | |
| The solder joints are full and shiny | Low solder-tin joints | Full, well-wetted solder joints enhance the tensile strength of LED components and long-term reliability. | |
| Wire • Core diameter • Outer skin diameter |
0.15 mm × 26 pcs | 0.15 mm × 17 pcs | Greater total conductor area provides higher current-carrying capacity and lower voltage drop. |
| 1.8 mm / 20 AWG | 1.7 mm / 20 AWG | Thicker outer diameter indicates more robust insulation and better load capacity. | |
| Adhesive backing | Genuine 3M 300LSE adhesive backing | Economical adhesive | 3M adhesive offers strong bond, temperature resistance, waterproofing, and good resilience for long-term mounting. |
Related Products You May Need:
Accessories
Connection Cable
