10mm 84leds DC12V 84 Pixels WS2815 Digital White LED Strip

Product Parameter

Item: STB-4PIN-W-84-12V

Voltage: DC 12V

Power: 12 W/M

Pixel Quantity: 84 pixels/m

LED Quantity: 84 LEDs/m

Cutting Unit: 11.9 mm

Break Continue: Yes

PCB Width: 10 mm

10mm 84leds DC12V 84 Pixels WS2815 Digital White LED Strip Pictures

Product Feature

For the 5M 12V WS2815 LED strip, there is no voltage drop even if all LEDs are turned on to full white light. You don’t need to inject power as frequently as the 5V WS2812 LED strip. Can be controlled by Arduino, Raspberry Pi, K1000C, SP105E, SP107E, SP110E, etc. Individually addressable. Dual signal lines.

This new 84 LEDs/meter 12V WS2815 individually addressable white LED strip is compatible with SMD5050 6000K daylight or 3000K warm white. Each LED forms a pixel. Offer 256 brightness levels. The white light is brighter and more uniform than with 60 LEDs per meter.

The circuit board features one data line and one backup line to ensure signal continuity. Even if one LED fails, the others remain operational.

10mm wide PCB, 84 LEDs/meter, 420 pixels per roll, 12W/meter power.

The backing features self-adhesive tape for easy attachment to flat or curved surfaces. Can be controlled by Arduino, Raspberry Pi, K1000C, SP105E, SP107E, SP110E, etc.

This 5-meter addressable cool white or warm white LED strip has zero voltage drop when powered from a single end. It has excellent color consistency.

For neon silicone tubing, please purchase our neon silicone diffuser separately.

WS2815 Technical Features

The control circuit and RGB chip are integrated into a 5050 component. Form a single externally controlled pixel.

A built-in signal shaping circuit achieves signal waveform shaping without distortion.

The refresh rate reaches up to 2 kHz. Support lower frequencies and more economical MCUs.

Signal transmission is possible between any two points within 3 meters without any additional circuitry.

The data transmission protocol utilizes a single NZR communication mode. Each pixel utilizes self-shaping transmission technology. It allows the number of cascaded pixels to be independent of signal transmission speed and limits only the speed of signal transmission. The BIN receives the data signal ensures that any IC damage will not affect the signal cascade transmission, and keeps the BIN in the signal receiving state until power is cut off and restarted.

WS2815 IC Chip Datasheet-PDF Free Download

Compatible with 10mm WS2815 LED Pixel Diffuser

The 84 LEDs/m LED strip creates a bright lighting effect, perfect for white lighting projects. For enhanced performance, pair it with flexible neon tubing and aluminum profiles.
If you want a spot-free, more even lighting effect, you can use our neon 20*20mm top view LED neon diffuser or 20*20mm black side LED neon diffuser that is compatible with 10mm LED strip lights.

Why Choose WS2815 Pixel LED Strips From Suntechlite?

We are a Chinese factory specializing in the design and production of pixel-addressable LED strips. We specialize in customizing LED pixel and LED neon products. With over 15 years of experience in customizing and producing high-quality LED products, we ensure our customers are satisfied with our service and products. Our WS2815 series addressable strips offer the following advantages over other manufacturers:

For more details, please click WS2815 DC12V LED Strip Advantages from Suntechlite.